Top Methods for Removing Mold
Mold remediation can be a tricky thing, since it's difficult to completely remove hidden mold. Here are some of the top strategies for removing mold and preventing it from coming back.
Wipe with Disinfectant
For hard surfaces, the best way to get rid of surface mold is to use a cloth or a sponge that's covered with disinfectant solution. You will need to scrub hard to remove the surface layers of mold. If you suspect that mold has penetrated far into the object, especially if the surface is very porous, then you may need to get rid of the item. Note that you should always wear protective equipment when removing mold; airborne particles can get into your lungs and become a health hazard. In addition to rubber gloves, you might want to use protective eye goggles and a high quality respirator.
A wet vacuum can help you remove excess water from damaged areas. This is an important step when the mold growth is due to a flood or basement leak. In order to completely air out your space, you may need to use a wet vacuum as well as a dehumidifier to remove water from the air and walls.
Removing Drywall and Damaged Materials
Some materials cannot be salvaged after a mold invasion. For instance, drywall is very hard to keep because you can't be sure that there's no mold hidden beneath the surface. To get rid of moldy drywall, you can use an exacto knife to cut away the damaged areas. Completely peel away and discard wallpaper that is tinged with mold. When you replace the drywall and add new paint, you may want to consider applying a waterproofing solution over the surface to keep the mold from coming back.
Use a HEPA Vacuum
HEPA stands for high efficiency particulate air, and this type of vacuum can pick up even small particles of mold that remain on the surface. This professional cleanup stage is often done after you take an initial pass at scrubbing and removing mold. While you may be able to rent a HEPA vacuum, it's often easier to include this in a mold removal service plan.
In order to completely get rid of mold, you may need to try a variety of methods like the ones listed above. A mold removal company like Firewater Restoration Services can offer you the equipment needed to do a full mold repair.